Garmin GHC Anweisungen Seite 9

Tack and Gybe
You can begin a tack or gybe using the remote.
Tacking and Gybing from Heading Hold
Before you can begin a heading hold tack or gybe using
the remote, you must assign Tack/Gybe to one of the
programmable keys
angle using the GHC device.
For more information about defining the tack and gybe angle,
see the GHC Owner's Manual.
1
Select the programmable key assigned to Tack/Gybe.
Left and right arrows appear on the remote screen.
2
Select
Tacking and Gybing from Wind Hold
Before you can begin a wind hold tack or gybe using
the remote, you must assign Tack/Gybe to one of the
programmable keys using the GHC device
1
Select the programmable key assigned to Tack/Gybe.
Left and right arrows appear on the remote screen.
2
Select
(page 5), and define the tack and gybe
or to tack or gybe to port or starboard.
or to tack or gybe to port or starboard.
EN–9
(page 5).