Beijer Electronics E-Serie Installationsanleitung Seite 85

Parameter E300
Supply +24 V DC (20-30 V DC) 3-pin jack connection block.
voltage CE: The power supply must conform with the requirements for SELV or
PELV according to IEC 950 or IEC 742.
UL: The power supply must conform with the requirements for class 2
power supplies.
Fuse
1 AT, Littelfuse R452 001 (Nano
Ambient tem- 0° to +50°C
perature
Storage tem- -20° to +70°C
perature
Relative Max 85% non-condensed.
humidity
EMC tests on The terminal conforms with the essential protection requirements in article
the terminal four of the directive 89/336/EEC. Noise tested according to: EN50081-1
emission and EN61000-6-2 immunity.
UL approvals UL 508, UL 1604 (Class I Div 2)
DNV approval Det Norske Veritas type
approval certificate. Location
classes: Temperature A,
Humidity B, Vibration A,
Enclosure C (panel front
only).
MTBF (Mean 104 322
time between
failure) (h)
Technical data for E700 and E710
Parameter
Front panel, WxHxD, mm
Mounting depth, mm
Panel cut out, see drawing
Front panel seal
Rear panel seal
E600 E610
2
SMF Slo-Blo) or 800 mAT, 5 x 20 mm.
–
61 368 92 578
E700
276 x 198 x 5.7
Excl. D-sub 87
Incl. D-sub 110
S3-02412
IP 65, NEMA 4, NEMA 4X (Indoor use only)
IP 20
E615 E615T
– –
73 458 –
E710
211,5 x 198 x 5.7
S4-02513
A-5