Technical Data - Beijer Electronics E-Serie Installationsanleitung

Technical data

Technical data for E50, E100, E150 and E200
Parameter E50
Front panel, 104 x 69 x 4.5
WxHxD, mm
Mounting Excl. D-sub 38
depth, mm Incl. D-sub 38
Panel cut out, S-02857
see drawing
Front panel IP 65, NEMA 4, NEMA 4X (Indoor use only)
seal
Rear panel IP 20
seal
Keyboard Membrane keyboard with polyester snap discs. Overlay film of Autotex
material F207 with print on reverse side. 1 million operations. See Appendix D.
Reverse side Alu-Zink
material
Weight, excl. 0.2 kg
D-sub
Serial port 25-pin D-sub contact, chassis mounted female with standard locking
RS422 screws 4-40 UNC.
Serial port 9-pin D-sub con-
RS232C tact, chassis
mounted male
with standard
locking screws 4-
40 UNC, availa-
ble when the
delivered con-
verter 232-25-
ADP is mounted
on the RS422
port.
Flash memory 16 kb
for application
E100 E150
142 x 90 x 3.5 142 x 100 x 3.5
Excl. D-sub 28 Excl. D-sub 28
Incl. D-sub 96.5 Incl. D-sub 96.5
S4-03205 S-03258
0.5 kg 0.5 kg
9-pin D-sub contact, chassis mounted male with stand-
ard locking screws 4-40 UNC.
64 kb 64 kb
E200
147 x 163.5 x 5
Excl. D-sub 38
Incl. D-sub 107
S4-02809
0.7 kg.
64 kb
A-1