Herunterladen Inhalt Inhalt Diese Seite drucken

Focal CUB EVO Gebrauchsanleitung Seite 21

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 22
CUB EVO
User Manual
D - Positioning
Contrary to loudspeakers, which have to be placed at a sufficient distance away from the walls and corners
of the listening room, we recommend positioning Cub Evo subwoofer in a corner.
By placing Cub Evo in a corner, the room resonances will be excited in a more linear and predictable
way. Not only will bass perception be optimal, but this disposition will also make it possible to boost the
bass level by 6dB. If for practical reasons you aren't able to place the subwoofer in a corner, experiment
positioning the subwoofer in different places within the room until you find the best compromise.
Generally speaking, it is better to place the subwoofer in front of the listening position (fig. C).
It isn't recommended to place it at the back of the room.
As the frequency ranges involved are omnidirectional, in principle the bass is not affected by objects or
furniture placed between the subwoofer and the listening point (fig. D et E).
E - Break-in period
The woofer used in Cub Evo is a complex mechanical component which requires a break-in period in order
to operate at its best and to become acclimatised to the temperature and humidity of your environment.
The length of time this takes can vary depending on the conditions and may extend over several weeks.
To reduce this break-in period, we recommend operating your subwoofer for about 20 consecutive hours
at medium volume, with music which is rich in bass. Once the loudspeakers' characteristics have totally
stabilised, you will be able to enjoy the full potential of your active subwoofer.
F - Conditions of warranty
Please contact your Focal dealer if you encounter any problems.
The warranty in France for any Focal product is valid for 2 years from the date of purchase, and rights
are non-transferable in the case of resale. In the case of defective equipment, the equipment must be
shipped at your expense in its original packaging to the dealer who will test the equipment in order to
determine the nature of the fault. If the product is still under warranty, the product will be returned to you
or replaced, "shipping pre-paid". If the product is no longer under warranty, you will be given an estimate
for the repairs. The warranty does not cover damage resulting from improper use or incorrect wiring
(e.g. burnt out voice coil, etc.)
Outside of France, Focal products are covered by a warranty whose conditions are determined locally
by the official Focal retailer in each country, in compliance with the laws in force in the respective
geographical area.
G - Maintenance
Only clean Cub Evo with a dry microfibre cloth. If Cub Evo is dirty, we recommend simply cleaning it with
a damp microfibre cloth.
Never use solvents, detergents, alcohol-based or corrosive products, scrapers or scourers to clean the
surface of Cub Evo. Only wipe delicately and never press down hard.
Your Focal-JMlab product has been designed and manufactured with high-quality materials
and components which can be recycled and re-used. This symbol indicates that electrical and
electronic equipment must be correctly disposed of separately from household waste at the end
of its operational lifetime. Please take this device to the household waste recycling centre or to
another recycling centre. This will help to protect the environment.
notice_CubEvo.indd 21
21
25/04/17 16:15

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis