Install An M6100 Series Chassis - NETGEAR M6100 Installationsanleitung

Install an M6100 Series Chassis

5.
This chapter includes the following sections:
• Unpack the XCM8903 Chassis
• Install the M6100 Switch Chassis
• Ground the M6100 Chassis Switch
The M6100 series chassis fits into a standard 19-inch (48.26 cm) rack.
Read the information in this chapter thoroughly before you attempt to
Note:
install the M6100 series switch chassis.
CAUTION:
Correct lifting of the M6100 Switch Chassis requires two people.
Before you lift a M6100 Switch Chassis, make sure that the chassis is
empty to prevent unnecessary weight. This also prevents damage to the
system components due to possible system chassis flex when you are
lifting.
31
5