Important Safety Instructions; Technical Data - Zar K-100 Bedienungsanleitung

IMPORTANT SAFETY INSTRUCTIONS!

This symbol indicates the existence of
a non-isolated or hazardous voltage
inside the case and a danger of electric
shock.
This symbol refers to important han-
dling and service notes in the accom-
panying documents. Please study the
instruction manual.
IMPORTANT:
Should your amplifier, after having fol-
lowed the instructions outlined above,
fail to function, please contact your
local dealer immediately.
Under no circumstances open the case
of the amp. Danger of electric shock!
No user service able parts inside.
Do not touch the electronics chassis.
Risk of fire!
Do not expose the amp to a humid or
dusty environment or use it as shelf for
beverages. Danger of electric shock
and fire!
WARNING:
This amplifier must be earthed! Please
check that the supply voltage details
given on the label (see rear panel) are
in accordance with your local electricity
supply.
04
MAINS OUTPUT:
Always use the delivered power cord!
If the cable appears to be damaged,
please contact your dealer and replace
the lead. The power chord is pluggable.
If you wish to play your amplifier in
countries with a differing standard
power plug, please obtain a suitable
power lead. Please pay attention to the
line voltage implicitly. Your amplifier is
designed for 220-230V/50Hz. Other
voltage systems can destruct your
amplifier.
FUSE:
The fuse is located in a compartment
below the mains connection socket.
When detecting a possible flaw never
bypass the fuse. When replacing please
play attention to the correct fuse indi-
cations. Never use a different fuse as is
indicated on the rear panel of the
amplifier! Do not plug the amp when the
cover of the fuse compartment is open.
Basic principle: Exposing oneself (or
others) to high noise levels may cause
irreparable hearing damages. In this
context we would like to point out
never to plug headphones to the inter-
nal speaker connection of the amplifier.
Here too, is a high risk of permanent
hearing damage.

TECHNICAL DATA

Output:
100W @ 4 ohms load
Frequency response:
70Hz-18kHz
Empfindlichkeit (1m/1W):
93dB
LF driver:
1x10" with 1.5" voice coil
HF driver:
1x1" voice coil
HF protection device:
PTC protective circuit
Dimensions:
480 x 310 x 643mm
Weight:
23.7kg
Specifications are subject to change
since we are striving to keep up with
the latest developments.
GB
CE
This is to certify that our ZAR Amplifier is in conformity
with: Council Directive 89/336/EEC (EMC Directive)
Applicable Standards: EN55013 : 2001 + A1 : 2003
Electromagnetic Compatibiltiy – Generic emission stan-
dards. Part 1: Residential, commercial and light industry /
EN55020 : 2002 + A1 : 2003 Electromagnetic Compatibiltiy
– Generic emission standards. Part 1: Residential, com-
mercial and light industry
ROHS AND WASTE ELECT-
RICAL ELECTRONIC EQUIP-
MENTS
This is to certify that our ZAR Amplifier is in conformity with:
Directive 2002/95/EC on the Restriction of the Use of Certain
Hazardous Substances in EEE (RoHS). The WEEE-guideline
is the EG-directive 2002/96/EG to reduce the soaring quan-
tities of electric and electronical equipments from unused
electric equipments. Goal is the avoidance, reduction as
well as the ecological disposing of the increasing quantities
of electronic scrap through a more extended responsibility
by the manufactors of the products. Unused ZAR – equip-
ments can be disposed for free at the local collecting points.
The costs for collection and recycling bears the company
GEWA GmbH, Isarauenstraße 17, D-82481 Mittenwald.
www.gewamusic.com
ZAR products are designed and serviced through GEWA
Europe GmbH, Germany.