Installing To Peerless Plp Model Adapter Bracket - Paramount PA740 Montageanleitung

Attaching Hook Bracket to Screen with VESA
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
FoR VeSA 75 MoUNTING PATTeRN:
®
Choose hole pattern as shown below. Attach hook
3
bracket (M) to back of screen using four M4 x 10
mm screws (e) as shown below.
*NoTe: If hole pattern is in a pocket, attach hook
bracket (M) to back of screen using four M4 x 20
mm screws (F) and four retaining spacers (C) as
indicated below.
M
e
*For screens with a
hole pattern in a pocket,
spacers (C) go between
hook bracket (M) and
screen.
For screen compatibility please refer to the LCD or plasma interface list on our website www.peerlessmounts.com or
call customer care for a screen specific PLP adapter bracket models (not UL evaluated).
FoR INSTALLING To PeeRLeSS PLP MoDeL ADAPTeR BRACKeT
NoTe: Refer to PLP model adapter bracket instruction
sheet for attachment of adapter bracket to screen.
NoTe: M5 x 10 mm screws are included with the PLP
model adapter bracket
Attach hook bracket (M) to adapter bracket using four
3
M5 x 10 mm screws.
75 or 100 Mounting Pattern
®
WARNING
FoR VeSA 100 MoUNTING PATTeRN:
Choose hole pattern as shown below. Attach hook
bracket (M) to back of screen using four M4 x 10
mm screws (e) as shown below.
C
M5 x 10 MM SCREW
8 of 46
M
e
M
GENERIC ADAPTER
BRACKET
ISSUED: 01-27-08 SHEET #: 095-9283-3 06-12-09