End Of Operation; Troubleshooting - Micromaxx MD 16517 Bedienungsanleitung

9. End of operation

If you do not plan to use the appliance for a long period of time, pull out the mains
plug and store the appliance in a dry location.

10. Troubleshooting

The product left our warehouse in perfect condition. If you do encounter a problem,
however, please consult the table below to see if you can solve the problem. If the
problem persists, please contact our customer service department.
Problem
The appliance is not work-
ing.
The blender does not
work.
Possible cause
The plug is not connected
to the mains.
The appliance has over-
heated.
The blender jug has not
been correctly attached.
The lid has not been at-
tached properly.
Remedy
Connect the appliance
to a properly installed AC
220-240 V~ 50/60 Hz safe-
ty socket.
Switch off the appliance
for a few seconds and
then switch it on again. If
the appliance still doesn't
work, allow it to cool
down for half an hour.
Attach the blender jug as
instructed in "5. Before ini-
tial use" on page 37.
Twist the lid onto the
blender jug until it closes
tightly and the protrusion
on the lid is fully aligned
with the handle on the
blender jug. Only then will
the safety contact on the
base allow operation.
43 of 114
DE
EN
FR
NL
DK