Before Initial Use; Attaching The Lid; Using The Blender - Micromaxx MD 16517 Bedienungsanleitung

5. Before initial use

Before using the appliance for the first time and after each subsequent use, rinse
the blender jug, blade assembly, lid and lid cap thoroughly. Please also read section
"7. Cleaning the appliance" on page 40.
NOTE
The appliance is driven by an electric motor. This can lead to a slight
smell during initial operation. This smell is normal and is not a sign of
malfunction. Ensure that there is adequate ventilation.
 Fill the blender jug.

5.6.1. Attaching the lid

 Place the lid onto the blender jug so that the catches on the lid engage with the
corresponding slots on the blender jug.
 Twist the lid onto the blender jug until it closes tightly and the protrusion on the
lid is fully aligned with the handle on the blender jug. Only then will the safety
contact on the base allow operation.
 Place the blender jug directly onto the drive shaft on the blender base.
NOTE
The blender cannot be operated if the blender jug is incorrectly fitted. If
incorrectly fitted, the safety contact on the housing edge would prevent
operation.
 Connect the blender to an AC 220-240 V ~ 50/60 Hz mains socket.
The blender is now ready for use.

6. Using the blender

WARNING!
Moving parts with sharp edges. There is a risk of injury.
Avoid touching the blade assembly.
ATTENTION!
Never remove the lid and/or blender jug before the blade as-
sembly has come to a complete standstill.
ATTENTION!
Always set the on/off switch to the OFFposition before inserting
or removing the blender jug! Never use the blender jug without
the lid on!
Place the blender jug on the base.
 Cut up larger pieces of food so that they are small enough to fit into the blender
DE
EN
FR
NL
DK
37 of 114