Power Tool Use And Care; Service; Specific Safety Information; Battery Charger Safety - RIDGID RBC 20 Bedienungsanleitung

RBC 20 Advanced Lithium Battery Charger
• Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.

Power Tool Use And Care

• D o not force electrical device. Use the correct elec-
trical device for your application. The correct electri-
cal device will do the job better and safer at the rate for
which it is designed.
• D o not use electrical device if the switch does not
turn it ON and OFF. Any electrical device that cannot
be controlled with the switch is dangerous and must
be repaired.
• D isconnect the plug from the power source and/or
the battery pack from the electrical device before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the electrical device acciden-
tally.
• S tore idle electrical devices out of the reach of chil-
dren and do not allow persons unfamiliar with the
electrical device or these instructions to operate
the electrical device. Electrical devices are dangerous
in the hands of untrained users.
• M aintain electrical devices. Check for misalignment
or binding of moving parts, breakage of parts and
any other condition that may affect the electrical
device's operation. If damaged, have the electri-
cal device re paired before use. Many accidents are
caused by poorly maintained electrical devices.
• U se the electrical device and accessories etc. in ac-
cordance with these instructions, taking into ac-
count the working conditions and the work to be
performed. Use of the electrical device for operations
different from those intended could result in a hazard-
ous situation.

Service

• H ave your electrical device serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the electrical
deviceis maintained.
4

Specific Safety Information

WARNING
This section contains important safety information
that is specific to this tool.
Read these precautions carefully before using
the battery charger to re duce the risk of electrical
shock or serious personal injury.
SAVE THESE INSTRUCTIONS!

Battery Charger Safety

• Charge only the RIDGID® rechargeable batteries
listed in the Accessories Section with the RIDGID
RBC 20 Advanced Lithium 18V Battery Charger.
Other types of batteries may burst causing personal in-
jury and property damage.
• Do not probe battery charger with conductive ob-
jects. Shorting of battery terminals may cause sparks,
burns or electrical shock.
• Do not insert battery into charger if charger has
been dropped or damaged in any way. Damaged
charger increases the risk of electrical shock.
• Charge battery in temperatures above 41°F (5°C)
and below +104°F (40°C). Store charger and bat-
tery packs in temperatures above -4°F (-20°C) and
below +104°F (40°C). Proper care will prevent serious
damage to batteries. Improper care of batteries may
result in battery leakage, electrical shock or burns.
• Use an appropriate power source. Do not attempt
to use a step-up transformer, an engine generator
or DC power receptacle. May cause damage to char-
ger resulting in electrical shock, fire or burns.
• Do not allow anything to cover the charger while
in use. Proper ventilation is required for correct opera-
tion of charger. Covering vents may result in fire. Allow
a minimum of 4" (10 cm) of clearance around the char-
ger for proper ventilation.
• Unplug the charger when not in use. Reduces risk of
injury to children and untrained persons.
• D o not charge battery pack in damp, wet or explo-
sive environment. Do not expose to rain, snow or
dirt. Contaminants and moisture increase the risk of
electrical shock.
• D o not open the charger housing. Have repairs per-
formed only at authorized locations.
• D o not carry charger by power cord. Reduces risk of
electrical shock.