Temperature Settings; Set Hysteresis; Set Temperature Alarm - TechGrow Clima Control Plus Bedienungsanleitung

BOX A/M Auto
BOX min 10%
=> BOX max 90%
Select box
For manual operation of the fan, select "Man".
In this mode you set the box power (ventilation capacity)
between 0% and 100% by turning the PTK.
Confirm by pressing the PTK.
BOX A/M Man
=> BOX power 40%
Select box
After a few seconds you will automatically return to the
main screen.

10. Temperature settings

You are in the main screen. Press the PTK once and
select "TMP".
=> TMP = 33.6 °C
RH = 66%
BOX = 90%
CO2 = 1112 PPM
Press the PTK.
=> Temp day 28.0°
Temp night 28.0°
Temp +/- 2.0°
>> NEXT >>
Select "Temp day", press the PTK and set the desired day
temperature by turning the PTK.
Press the PTK to confirm.
Temp day 28.0°
=> Temp night 28.0°
Temp +/- 2.0°
>> NEXT >>
Select "Temp night" and press the PTK. Turn the PTK to
set the desired night temperature.
Press the PTK to confirm.
____________________________________________________________________________________________________________________________
TechGrow | Innovative Growing Solutions

10.1 Set hysteresis

You are in the main screen.
Press the PTK once and select "TMP".
=> TMP = 30.6 °C
RH = 66%
BOX = 90%
CO2 = 1112 PPM
Press the PTK.
Temp day 28.0°
Temp night 28.0°
=> Temp +/- 2.0°
>> NEXT >>
Select "Temp +/-" and press the PTK. Turn the PTK to set
the desired hysteresis.
Press the PTK to confirm.

10.2 Set temperature alarm

You are in the main screen. Press the PTK once and
select "TMP".
=> TMP = 33.6 °C
RH = 66%
BOX = 90%
CO2 = 1112 PPM
Press the PTK and select >> NEXT >>.
Temp day 28.0°
Temp night 28.0°
Temp +/- 2.0°
=> >> NEXT >>
Press the PTK and select "Overtemp".
=> Overtemp 34.0°
Temp offset 0.0°
Night delay 5m
>> NEXT >>
Press the PTK and set the desired overtemp value.
Press the PTK to confirm.
20