Herunterladen Inhalt Inhalt Diese Seite drucken

Whispbar K806W Fitting Kit Montageanleitung Seite 4

Basisträgersystem
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
EN
Fitting Kit
K806W
Use hex screwdriver to reverse adjusting
screw 10 turns.
Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
Ensure each end of the crossbar is
adjusted equally.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Please check the rear of this manual for
information relating specifically to your
vehicle.
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis