Interface Description - LevelOne WAP-8122 Schnellinstallationsanleitung

l Interface Description
Button / Interface
RESET
(Reset to Default)
LAN port
(10/100/1000Mbps RJ45 port)
WAN / PoE port
(10/100/1000Mbps RJ45 port)
DC IN
With the AP turned on, press the Reset button for 10~14 seconds
until the green and blue LED front panel flashes quickly, reset the
device to factory default settings.
The LAN port is used to connect to network devices, such as a switch
or PC / NB
The WAN/POE port is used to connect to network devices, such
as a POE switch OR POE injector to power the device
(IEEE802.3at ) 48V DC.
( PoE injector unit is to be ordered separately
12V/1.5A DC input Power Adapter .
( Power Adapter unit is to be ordered
-2-
Description
)
separately)