Herunterladen Inhalt Inhalt Diese Seite drucken

Whispbar K467W Montageanleitung Seite 8

Basisträgersystem
Inhaltsverzeichnis

Werbung

EN
Fitting Kit
K467W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Clamps directly to edge of roof under the
doors
Please check the rear of this manual for
information relating specifically to your
vehicle.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Tighten adjusting screw to 5 Nm (3.7 ft lb).
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis