Connection Example - Edirol MA-20D Bedienungsanleitung

Connections
Attaching the Rubber Feet
(Included)

Connection Example

INPUT
(FROM RIGHT)
Sound Module, CD Player, MD Player, etc.
OUTPUT
(TO LEFT)
Precautions When Connecting
and Turning on the Power
921
• To prevent malfunction and/or damage to speakers or
other devices, always turn down the volume, and turn off
the power on all devices before making any connections.
926 modify
• Using a connection cable that contains a resistor can
cause the sound level to be low. Use a connection cable
that does not contain a resistor.
941
• Once the connections have been completed, turn on
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other
devices. (When turning the power off, reverse this
procedure.)
< Connected devices → MA-20D (R) → MA-20D (L) >
942
• This unit is equipped with a protection circuit. A brief
interval (a few seconds) after power up is required before
the unit will operate normally.
Rear Panel
Select
7