Panel Description - Edirol MA-20D Bedienungsanleitung

Panel Description

Left Channel
fig.2
1
Left Channel
1. POWER Switch, POWER Indicator
This turns the power of the left (L) channel on/off. When
the power is on, the indicator located at the side of the
switch will light.
2. L Channel Input Jack
Connect this to L Channel Output Jack 14 on the right-
side unit. For the connection, use the included speaker
cable.
3. AC Inlet
Connect the included Power cord here (p. 17). Plug it
firmly in, so that the cable does not accidentally become
disconnected.
Right Channel
4. POWER Switch, POWER Indicator
This turns the power of the right (R) channel on/off.
When the power is on, the indicator located at the side of
the switch will light.
5. PHONES Jack
When you connect headphones to this jack, no sound
will be heard from the speakers.
6. BASS Control Knob
7. TREBLE Control Knob
These adjust the tones of the bass and treble. Set to center
to make the tones flat.
6
Right Channel
fig.3
2 3
8. VOLUME Knob (DIGITAL/LINE 1)
This adjusts the volume of devices connected to digital
input connectors 10, 16, and LINE 1 Input Jacks 13.
9. VOLUME Knob (LINE 2)
This adjusts the volume of the device connected to LINE
2 Input Jacks 12.
10. Digital Input Connector (Optical)
This is the digital input connector for optic-fiber cable.
11. Digital Input Select Switch
This switch selects digital input connector 10 or 16 on
the rear panel. Select the connector used for the input
signal.
12. LINE 2 Input Jacks (L (MONO), R) (1/4" phone type)
For mono input, use the L (MONO) jack.
13. LINE 1 Input Jacks (L, R) (RCA phono type)
14. L Channel Output Jack
Connect this to L Channel Input Jack 2 on the left-side
unit.
15. AC Inlet
Connect the included Power cord here (p. 17). Plug it
firmly in, so that the cable does not accidentally become
disconnected.
16. Digital Input Connector (Coaxial)
This is the digital input connector for coaxial cable.
4 5 6 7 8 8 9 10 11 12 13 14 15 16