Maintenance And Service; Maintenance And Cleaning - Berner BACWL Originalbetriebsanleitung

OBJ_BUCH-3354-001.book Page 19 Wednesday, August 30, 2017 10:30 AM
– As an uplight with the lamp head aimed upwards.
– Swivelled 90 ° to shine light into the room.
– With lamp head tilted approx. 120 ° for glare-free lighting of the work
area, e. g. a desk.
– With lamp head tilted approx. 200 ° to illuminate the floor.
Note: At a tilt of more than 90 ° the cordless worklight has to be fixed.
Utility Hook (see figure B)
You can use the utility hook 7 to attach the cordless worklight to an ob-
ject.
Carabiner (see figure C)
You can use the carabiner 4 to attach the cordless worklight e. g. to a
rope or belt.
Magnetic Mount (see figure D)
You can use the magnetic mount 6 to attach the cordless worklight to
ferromagnetic surfaces. Do so carefully in order to avoid scratching
delicate surfaces.
Tripod Mount (1/4") (see figure E)
You can use the tripod mount 8 to screw the cordless worklight onto a
tripod.

Maintenance and Service

Maintenance and Cleaning

When the battery is no longer operative, please refer to an authorised
after-sales service agent for Berner power tools.
The cordless worklight is maintenance-free and contains no compo-
nents that must be replaced or maintained.
To avoid damage, clean the plastic lens of the cordless worklight only
with a dry, soft cloth. Do not use cleaning agents or solvent.
Transport
The contained lithium-ion batteries are subject to the Dangerous
Goods Legislation requirements. The user can transport the batteries
English | 19
1 609 92A 44S • 30.8.17