NGS GSX210 Bedienungsanleitung Seite 4

PAIRING/RECONNECTION
FOR BLUETOOTH SPEAKER
1. Turn the switch to the ON position. A "Bluetooth Mode"
message will play on the speaker, and the blinking blue
LED turns on to indicate that the device is turned on
and in search/pairing/reconnection mode to establish
the link.
2. Now turn on the Bluetooth function on your mobile
phone.
3. Search for "NGS GSX.-210" and select it to pair (for the
first time, or to pair a new device again).
4. The Bluetooth speaker will automatically reconnect if
your mobile phone has been paired (depending on the
mobile phone type and settings, some devices may
require manual reconnection).
5. If pairing was successful, the speaker will make a "beep"
noise and the blue LED will remain on
BLUETOOTH/USB/FM RADIO/
SD CARD/AUX IN MODES
To go from one mode to another, press the "M" key. If
the device does not have a connected SD micro-card or
USB drive, it will ignore these modes when the "M" key is
pressed.
BLUETOOTH SPEAKER CONTROL
1. While playing music, press the button
music. Press it again to restart it.
2. Press the button to skip to the next music file.
3. Press the button to rewind to the previous music file.
SD CARD MODE
1. Insert the SD card into its slot.
2. The device will automatically play the MP3 music on
the card.
to stop the