Philips HL5885 Bedienungsanleitung Seite 9

Reheat button
The Reheat function allows you to reheat bread
without browning it.
1 Insert one or more slices of bread into the
toaster. Make sure that the slices do not
overlap and that the bread carriage is in
raised position.
2 Press the toasting lever down until it locks.
C
3 Press the Reheat button.
When the Reheat cycle has been completed, the
toaster will raise the bread. If you wish to
interrupt the reheat cycle before it is finished,
simply press the Cancel button.
- Tips:
- In order to achieve a uniform browning result,
we advise you to wait at least 30 seconds
between toasting cycles to allow the browning
control to automatically reset itself.
- Stale bread toasts more rapidly than fresh
bread.When toasting stale bread, select a lower
browning setting than you would normally use.
- When toasting two slices, it is recommended to
use slices that are the same size and that are
equally fresh.
- When toasting a single slice of bread, set the
browning control to a lower setting than you
would normally use.The toaster will heat the
entire toasting chamber, even when you have
ENGLISH
9