Step 5 Projecting; Projecting The Picture; Turning Off The Power; Selecting The Picture Viewing Mode - Sony VPL-VW5000 Kurzreferenz

Step 5

Projecting the Picture

1
Turn on both the unit and the equipment connected to
the unit.
2
Press INPUT to display the input palette on the
projection surface.
3
Select the equipment from which you want to display
images.
Press INPUT repeatedly or press M/m/
select the equipment from which to project.
Example: To view the picture from the video equipment
connected to the HDMI 1 connector of this unit.

Turning Off the Power

1
Press the ?/1 (On/Standby) button.
The message "POWER OFF?" appears.
2
Press the ?/1 (On/Standby) button again before the
message disappears.
The ON/STANDBY indicator flashes in green and the
fan continues to run to reduce the internal heat.
The fan stops and the ON/STANDBY indicator
changes from flashing green to remaining red.
You can disconnect the AC power cord.
Note
Never disconnect the AC power cord while the unit is turned on.
You can turn off the unit by holding the ?/1 (On/Standby) button for
about 1 second, instead of performing the above steps.
For more information, refer to "Projecting" in the Operating
Instructions contained in the supplied CD-ROM.
16
GB
Projecting
Projecting
(enter) to

Selecting the Picture Viewing Mode

You can select the picture viewing mode that best suits the
type of video source or room conditions.
You can save and use different preset modes for 2D/3D
respectively.
Press one of the CALIBRATED PRESET buttons.
CALIBRATED PRESET buttons
Setting items Description
CINEMA FILM 1 Picture quality suited to reproducing the
highly dynamic and clear images typical of
master positive film.
CINEMA FILM 2 Picture quality suited to reproducing the rich
tone and color typical of a movie theater,
based on the Cinema Film 1.
CINEMA Picture quality suited to reproducing digital
1
DIGITAL * cinema-like images resembling DCI
specifications.
REF A picture quality setup suitable for when you
want to reproduce faithfully the original
image quality, or for enjoying image quality,
without any adjustment.
TV Picture quality suited for watching TV
programs, sports, concerts, and other video
images.
PHOTO Ideal for projecting still images taken with a
digital camera.
GAME Picture quality suited to gaming, with well-
modulated colors and fast response.
BRT CINE Picture quality suited for watching movies in
a bright environment.
BRT TV Picture quality suited for watching TV
programs, sports, concerts, and other video
images in a bright environment.
USER1, USER2, Adjusts the picture quality to suit your taste
2
USER3 * then saves the setting. The factory default
setting is the same as "REF."
*1: The CINEMA DIGITAL mode is not available on the remote
control.
*2: The USER1 mode is selected by pressing the USER button. The
USER2 mode and USER3 mode are not available on the remote
control.