Bluetooth Indicator - Conceptronic CSPKBTTL Kurzanleitung

1, Bluetooth indicator:

The Bluetooth indicator light will flash rapidly when in pairing mode. The blue light flashing slowly means
Bluetooth is connected, and the speaker will begin Bluetooth music playing.
2. TF card music playing indicator:
The speaker is in TF card music playing mode when the blue indicator light flashes in TF card playing mode
3. Charging:
1. Please make sure the speaker is fully charged before first use. Charge the speaker with the USB cable provided,
which is compatible with any computer or cell phone 5V output charger. The charge indicator light will be red
while charging, then when the battery is fully charged it will turn off.
2. Charge time: about 4 hours
Bluetooth mode:
1. Bluetooth connection:
This speaker supports Bluetooth devices with A2DP function. Slide the power switch first, then enter Bluetooth
mode, Bluetooth indicator will flicker blue alternately, together with voice prompts. The speaker is in pairing
state at this point, and Bluetooth will only be paired and connected successfully in this mode.
2. Mobile phone connection:
Step 1: Open the Bluetooth setting on your phone or tablet and click "search device". iPhones will search for
Bluetooth devices automatically.
Step 2: You have found the Bluetooth speaker when the screen displays the character "CSPKBTTL", click on it in
your device to pair the connection.
Step 3: Enter "0000" and click OK if there's a prompt that requires you to enter a password.
Step 4: The phone or tablet will indicate when the pairing is successful. The character on the display of the
speaker will stop flickering.
3. Computer connection:
Activate the Bluetooth function first if the computer has Bluetooth capability. It may be necessary to install the
Bluetooth driver and plug in the Bluetooth adapter when there is no Bluetooth available.
Step 1: Click the Bluetooth icon at the lower right of the computer by using the mouse right button, then
choose "device adding."
Step 2: Bluetooth adapter will search for the speaker automatically, and the screen displays the character
"CSPKBTTL".
Step 3: The computer will install the driver automatically after double clicking the character "CSPKBTTL", and
display that the driver has installed successfully.
Step 4: Double click the Bluetooth icon, then the speaker connects to the computer successfully and will be in
use. Please check the computer audio device has switched to Bluetooth mode or connected properly if the
speaker still cannot play music successfully.