AGPtek M6S Bedienungsanleitung Seite 13

1. When using the radio function for the first time or when there is no station, the station can be
added by [Station list], [Manual Tune], [Auto Tune].
2. If you can't search for an FM radio station, or if the FM sound quality is not good, please try
adjusting the position of the wired headset or antenna. In some remote places, the FM signal
may be poor. Please contact the local staff working in FM broadcasting to confirm whether the
FM signal is covered or not.
3. The FM radio does not support playback by Built-in speaker. There is no built-in antenna. So it
is necessary that the wired earphones or antenna connect to the 3.5mm port for receiving
signals.
4. FM radio supports listening with the wired earphones connection/Bluetooth connection
1) Wired earphones listening: Before turning on the FM radio, you should connect to
the wired earphones for listening;
2) Bluetooth connection listening: You can use the wired earphones or antenna to
receive the signal, and then connect Bluetooth devices.
Bluetooth
Find "Bluetooth" on Home menu and press button
 Bluetooth On/Off. Choose to enable or disable Bluetooth.
 Bluetooth on/off Memory. Choose On if you want to reconnect with devices connected before
by Bluetooth automatically when next time you turn on the player.
 Search for device. When the Bluetooth is enabled, choose "Search for device" to search the
nearby devices, then all of the devices which has opened its Bluetooth will be listed.
 Device List. Choose from the available devices and select to connect/disconnect.
Note: Please turn on the Bluetooth of the device you want to connect to at first.
The AGPTEK-M6S/M16S can remain connected to the Bluetooth device until you turn off the
Bluetooth function. When you are not using the Bluetooth function, turn off the Bluetooth.
Note :
1. In the following circumstances, the pairing information will be deleted. Please pair again.
1) One or both of the devices are reset to factory settings.
to access to its function.
11