Sector RETROGRADE 0S22 Bedienungsanleitung Seite 4

0S22 inglese
1/20(1/1) second hand keeps continuously for 60 seconds after starting,
and then stops at ZERO position.
Measuring time with the chronograph
1. Press button "B" to change the watch to the chronograph mode. The second
hand stops at the ZERO second position, and changes to the chronograph
1/20(1/1) second hand.
2. The chronograph can be started and stopped each time button "A" is pres-
sed. The chronograph 1/20(1/1) second hand stops at the ZERO second
position 60 seconds after starting, When button "A" is pressed to stop the
chronograph, the chronograph 1/20(1/1) second hand advances rapidly
to display the measured time.
3. Pressing button "B" resets the chronograph and all hands return to their
ZERO positions.
* Moving of the retrograde chronograph is a demo.
Actual measurement will be shown when retrograde demo stopped / STOP
button is pushed.
RESET
21-12-2007 15:59
"A"
TIME MEASUREMENT
Pagina 4
"A"
"A"
"B"
STOP
"B"