For Windows - Pioneer DDJ-WEGO2 Bedienungsanleitung

!
Windows
™ ®
— ATI or NVIDIA video card with 256 MB of dedicated DDR3 RAM
— Video card must support dual-screen output.
!
Full functionality is not guaranteed on all computers, even those meeting the
operating environment requirements described above.
! Even with the required memory indicated for the operating environment above,
lack of memory due to resident programs, the number of services, etc., could
prevent the software from offering optimal functionality and performance. In
such cases, free up sufficient memory. We recommend installing additional
memory for stable operation.
!
Depending on the computer's power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using VIRTUAL DJ LE.
! Note that problems may arise with the functionality of VIRTUAL DJ LE depending
on other software running on your computer.
 Installing the VIRTUAL DJ LE software
! Cautions when the included software involves an Internet
environment
A separate contract with and payment to a provider offering Internet
services is required.
! The installer screen's design may differ depending on the version of
VIRTUAL DJ LE, but the operating procedure is the same.
About the installation procedure
The installation procedure depends on the operating system (OS) on the
computer you are using.

For Windows

After installing the driver software, install the VIRTUAL DJ LE software.
For Mac OS X
Only install the VIRTUAL DJ LE software.
About the installation procedure (Windows)
Do not connect this unit and the computer until installation is
completed.
! Log on as the user which was set as the computer's administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Turn on the computer's power.
2 Insert the included CD-ROM into the computer's CD
drive.
The CD-ROM menu is displayed.
! If the CD-ROM menu does not appear when the CD-ROM is inserted,
open the CD drive from [Computer (or My Computer)] in the [Start]
menu, then double-click the [CD_menu.exe] icon.
3 When the CD-ROM menu appears, select [Install
Driver Software (Pioneer_DDJ_WeGO2_Driver_X.XXX)],
then click [Start].
4 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the VIRTUAL DJ LE software.
! When installing on Windows XP
If [Hardware Installation] appears on the screen while the installa-
tion is in progress, click [Continue Anyway] and continue with the
installation.
5 Select [Install VIRTUAL DJ LE(DDJ-WeGO2)] from the
CD-ROM's menu, then click [Start].
The VIRTUAL DJ LE installer is launched.
6
En
6 Once the VIRTUAL DJ LE installer is launched, click
[Next].
! To return to the previous screen: click [Back].
! To cancel installation: click [Cancel].
7 Read the contents of the [End-User License
Agreement] carefully, and if you agree, check [I accept
the terms in the License Agreement], then click [Next].
If you do not agree to the terms of the [End-User License Agreement],
click [Cancel] to cancel installation.
8 Select the type of installation for VIRTUAL DJ LE, then
click [Next].
! When [Typical] is selected, plug-ins and other components are
installed simultaneously. Normally select [Typical].
! When [Custom] is selected, you can select which components to
install.