For Windows; Checking The Latest Information On The Included Software - Pioneer RMX-1000 Bedienungsanleitung

Launching remixbox/Viewing the
Operating Instructions
Log on as the user which was set as the computer's administrator before
using remixbox.
The operating instructions can be viewed by launching remixbox then
clicking [Manual] from the remixbox [Help] menu.

 For Windows

7, Windows Vista
®
XP
Click on the Windows [Start] menu button, then [All
Programs] > [Pioneer] > [remixbox 1.x.x] > [remixbox
1.x.x].
! The 1.x.x indicates the remixbox version.
 For Mac OS X
Open the [Application] folder with Finder, then double-
click [remixbox 1.x.x.app].
! The 1.x.x indicates the remixbox version.
Connecting this unit and computer
1 Slide the [ON, STANDBY] switch on the rear panel of
this unit to the [ON] position.
Turn on the power of this unit.
2 Connect this unit to your computer via a USB cable.
! This operation does not work with computers that do not support
USB 2.0.
! When using Windows XP, if another USB-MIDI device is connected
simultaneously to the computer, it may not operate properly or may
not be recognized. Only connect the computer and this unit.
! Connect this unit and the computer directly using the included USB
cable.
Checking the latest information on
the included software
For the latest information on the included software and supported oper-
ating systems, see the website below.
http://pioneerdj.com/support/
! Operation cannot be guaranteed when multiple units of this mixer
are connected to a single computer.
20
En
and Windows
® ®