Troubleshooting; Care And Maintenance - switel SPF8266 Benutzerhandbuch

Troubleshooting

If the signal is poor, or there is interference
Check that the channel switches on the camera and the receiver are set
to the same number.
If there is a microwave oven in use in the path between the camera and monitor,
remove the microwave oven or turn it off.
Make sure the camera and the monitor are within range of each other
(range of approximately 300 feet; 100 meters in a clear line of sight).
If the above steps don't help, set both the camera and monitor to other channels.
Make sure the system (NTSC/PAL) is correct.
NOTE:Press the
button simultaneously to power up, the monitor will set to NTSC video
display.
Press the
button simultaneously to power up, the monitor will set to PAL video
display.

Care and Maintenance

Keep all parts and accessories out of young children's reach.
Fingerprints or dirt on the lens surface can adversely affect camera performance.
Avoid touching the lens surface with your fingers.
Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry clot
to wipe off the lens.
The receiver is for indoor use only. Do not use or store it in dusty, humid, hot or
very cold area.
Do not attempt to open the case. Non-expert handling of the device may damage the system.
Avoid dropping or strong shocks.
Operate this product using only the power supply included or provided as an accessory.
Do not overload electrical outlets or extension cords. This can result in fire or electric shocks.
Do remember that you are using public airwaves when you use the system and that
sound and video may be broadcasted to other 2.4 GHz receiving devices. Conversations,
even from rooms near the camera, may be broadcasted. To protect the privacy of your home,
always turn the camera off when not in use.
button during power up,that is, press the power button and
button during power up,that is, press the power button and
5