Setting Up The Monitor - switel SPF8266 Benutzerhandbuch

2

Setting up the Monitor

2
.1
Power Supply
1. Plug one end of the provided power adapter into a wall outlet and the
other end into the back of the monitor. See Fig 8 .
Note:Use the adapter labeled OUTPUT:12V DC with the monitor.
2. Turn the monitor on.
2
.2
Connecting to Wire Cameras
Insert the A/V cable of the camera in the A/V IN jack of the monitor.
2
.3
Connecting to TV
Insert one end of the A/V cable into the A/V OUT jack of monitor and the
other end into one A/V IN jack of TV. See Fig 10 .
3
Function Displays
3
Setting the Brightness
.1
1. Press MENU button till function mode appears. See Fig 11.
2. Press MENU selection buttons
SELECT button.
3. After using buttons
3
.2
Setting the Contrast
1. Press MENU button till function mode appears. See Fig 12.
2. Press MENU selection buttons
SELECT button.
3. After using buttons
3
.3
Setting the Saturation
1. Press MENU button till function mode appears. See Fig 13.
2. Press MENU selection buttons
SELECT button.
3. After using buttons
&
& to finish adjusting, press the SELECT button.
&
& to finish adjusting, press the SELECT button.
&
& to finish adjusting, press the SELECT button.
to select Brightness, and press the
to select Contrast, and press the
to select Saturation, and press the
3