Maintenance - Schneider Airsystems AirMaster AM 22-8 Original Bedienungsanleitung

22 MAINTENANCE

Only authorized Schneider Druckluft GmbH personnel is to carry out maintenance operations
that are not included in this manual.
Always wear protective clothes and gloves during the maintenance.
22.1 BEFORE MAINTENANCE
Caution: Hot surfaces inside the compressor cabinet immediately after stopping.
Stop the compressor.
a
Turn the power off from the main switch and make sure that the compressor cannot be accidentally
b
started.
The blow down function empties the receiver after stopping; wait 20 seconds.
c
22.2 AFTER MAINTENANCE
Turn the power on from the main switch.
a
Start up the compressor.
b
2-18