Maintenance - Sansaire Delta Gebrauchsanleitung

Maintenance

CLEANING
In the course of normal use, food particles and minerals from the water bath may
collect on the Sansaire Immersion Circulator. We recommend regular cleaning of the
housing, impeller, and heating coils.
1. Power off, unplug, and remove the Sansaire from the water bath. If the unit is hot,
wait for it to cool down before proceeding.
2. Remove the power cord from the back of the unit.
3. Remove the clamp from the back of the unit.
4. Remove the back cover. NOTE: The upper section of the Sansaire contains sensitive
electronics and should never come in contact with water.
5. To remove the impeller cover, twist it clockwise.
6. Pull the impeller cover down to remove.
7. While holding the unit upright, rinse under running water to remove food particles.
8. If necessary, scrub the unit gently with a sponge or brush and a drop of dish-
washing liquid. Rinse the unit thoroughly, ensuring that water does not enter the
upper section.
9. Reinstall the impeller cover, and twist it until it is aligned with the pump outlet
opening. Reinstall the back cover and clamp.
16
FOR RECIPES AND TECHNIQUES, VISIT SANSAIRE.COM
4
5
PLEASE SAVE THIS MANUAL
6
17