System Features - Audio-Technica M3 Handbuch

M3 Wireless In-Ear Monitor System – Introduction
Thank you for buying the Audio-Technica M3 Wireless In-Ear Monitor
System.

System Features

• High-fidelity sound with clean, articulate mix allows you to
hear yourself better at lower volumes
• Over 1250 selectable UHF channels with automatic frequency
scanning
• Up to 16 simultaneous systems per frequency band
• Three receiver modes: Personal Mix, stereo, and mono
• Personal Mix Control allows you to adjust your own mix on stage
• LCD information display offers step-through menus for setting
preferences
• XLR loop output (true pass-through) connects signal to mixing
console, additional IEM system or recording device with no
signal degradation
• Adjustable squelch eliminates annoying static
• Pilot tone protects against RF interference when the transmitter
is turned off
Note: M3 "L " Band receivers must be used only with "L " Band
transmitters; the same holds true for M3 "M," "E," and "F" Band
receivers and transmitters. For multiple-channel applications, as
many as 16 systems may be used together per frequency band.
• Three-stage limiter (defeatable) helps protect your hearing from
sudden peaks
• Portable system is quick to load and set up
• Reduces on-stage audio clutter for better overall mix & less
feedback
• Use any number of M3R Stereo Receivers on the same frequency
• Transmitter offers switchable RF power, with Hi, Low, and Off
settings. RF Off setting allows you to set frequency and other
control settings without transmitting RF.
• Earphones with proprietary dynamic driver offer full frequency
response and outstanding isolation
• Earphones feature personal fit with 3 sizes of rubber eartips
plus an ear-conforming foam tip
• Selectable auxiliary input offers connection point for ambient
microphone, click track, or other mic- or line-level input.