HANSGROHE AXOR Starck 10402000 Montageanleitung Seite 20

Assembly
1 Flush through the supply pipes.
2 Mount the S - unions and align them.
3 Fasten the mixer with the washers.
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
10402000: The flow is changed from bath to
shower function by pulling the knob at the upper
side of the spout. After shutting off the water
flow, the mixer returns automatically to the bath
function.
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Centre distance:
Connections G ½":
Rate of flow:
4
max. 1 MPa
0,1 – 0,5
1,6 MPa
max. 80° C
65° C
cold right - hot left
ca. 22 l/min 0,3 MPa
English
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used
together with hydraulically and thermically
controlled continuous flow heaters if the flow
pressure is at least 0,15 MPa.
Spare parts see page 3
1 handle
1.1 screw cover
2 flange
3 nut
4 cartridge cpl.
5 flange
6 S-union
7 spray former cpl.
8 selector assy
9 diverter knob
10 non return valve
11 noise reduction
12 hose
13 filter packing (25)
14 hand shower
10490000
96338000
96395000
96461000
92730000
96467000
94140000
97467000
94077000
96466000
94074000
96429000
28282000
94246000
28531000