Securing The Projector To The Adjustment Unit - Canon LV-WL01 Montage- Und Installationshandbuch

q
Attach the adjustment unit to the projector using
the 5 screws (M4 x 18) which are supplied.
w
Remove the two bolts (for drop-prevention) from the setting plate. Loosen the four bolts located on
the top of the adjustment unit and set the projector with the adjustment unit onto the setting plate.
e
Tighten the four bolts which were loosened to secure the projector to the setting plate. Attach the
two bolts (for drop-prevention) to the setting plate.

Securing the projector to the adjustment unit

Bolts (for drop-prevention) x 2
Loosen bolts
x 4
Bolts (for drop-prevention) x 2
Screws (M4) x 5
(supplied)
Adjustment unit
Projector
Setting plate
Projector with the adjustment unit
6