Attach The Drop-Prevention Wire To The Projector - Canon LV-WL01 Montage- Und Installationshandbuch

■ Attach the drop-prevention wire to the projector

To prevent the projector from falling down, use the supplied drop-prevention wire to connect the
projector and the setting plate.
q Pass the supplied drop-prevention wire through the drop-prevention wire installation bar of the
projector as shown in the illustration.
Drop-prevention wire installation bar
w
Pass the wire through the holes of the setting plate as shown in the illustration.
e Secure the end of the wire at the bottom of the wall plate with the screw (M4 x 10) supplied with the
wall plate as shown in the illustration.
9
Drop-prevention
wire
Screw (M4 x 10)