Herunterladen Inhalt Inhalt Diese Seite drucken

Causes And Remedies To Installation Problems - Phonocell VM190 Montageanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 53

Causes and remedies to installation problems

Problema
Display does not show
anything
If the remote-control-unit
does not interact with the
Monitor.
No picture
The picture on the display
is rather dark.
There is no sound in the
head-phones.
Reproduction does not
start.
Pictures is not clear or
disturbed.
Reproduction is bympy.
"INVALID DISC FORMAT"
Missing Sound
Causa
The current-supply cable may not
have been inserted correctly or the
fuse may be defect.
Check selected video-source
Remote-control battery is flat.
There are obstacles between remote-
control and monitor.
The battery isolation-strip has not
been taken off.
Check selected video-source
The in-car temperature is too low.
The luminosity-level is too low.
The head-phones are Off or batteries
are empty
Objects may be hindering the recep-
tion of the signal.
You are beyond the transmitter's
maximum action field
Disc wrong inserted
Disk dirty
Insert disk is not compatible with
Player
Watching is reserved to adults only.
Car-battery is exstremely weak
(nearly flat)
Disk is scratched or damaged
No disk is inserted
Disk is very dirty
Wrong Audio-selection
Consequently, check the current-
supply cable or replace the fuse
Select internal or external video, in
relation to the source.
Replace battery (as per instructions)
Clean the sensors and make sure
there are no objects capable of
interfering in transmission.
Consequently, take off the battery
isolation-strip.
Select internal or external video, in
relation to the source.
Wait a few seconds until the liquid
cristals get warm.
Control the "Brightness"-function.
Switch head-phones ON.Replace
the battery
Remove the obstacles placed befo-
re the signal
Move nearer to the Screen.
Check and insert disc with label
upward.
Clean disk.
Check that the formats to be repro-
duced are compatible with the
player.
Eliminate child-protection or change
protection-level.
Check battery and cables DVD-pla-
yer does not work correctly if tension
is lower than 10,8 Volt
Replace disk
Insert a disk
Clean disk
Select the Audio-Exit in due respect
of the effected connections.
34
Rimedio

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis