Language Setup - Phonocell VM190 Montageanleitung

Setup-Regulations
Use the cursors to move to the location contain-
ing the four stars. Digit the old Password (in the
Factory Setup the password is VOID). Now digit
the new password you wish to adopt.
When the password is de-blocked, go to the line
Rating to modify the protection-level by choosing
one of the following levels:
8.Adult → 1. Kid safe → 2.G → 3.PG → 4.PG-13 →
5.PG-R → 6.R→ 7.NC-17
By going to the line DEFAULT and pressing
ENTER, all changes will be cancelled and the Fac-
tory Setup will return.
ExIT SETUP
LANGUAGE SET-UP
To enter the menu, press the SETUP-key.
The monitor will show the SET-UP-menu.
Move with the remote-control keys ( 34 ) and select
with ENTER-key the function required (Language,
Audio, Subtitle, Menù).
Within the LANGUAGE-section, it is possible to
change the language, audio and subtitles of the
DVD-player.
The set-up of the film-language depends from the
DVD and can therefore vary from the selected set-
up.
Normally, the DVDs ask for the language-set before
showing the title-menu.
LANGUAGE OF MENU-FUNCTIONS
With cursors, move to bottom and go to the line
OSD menu.
Press ENTER and select the required language.
Press SETUP to leave the menu.
LANGUAGE FOR AUDIO
Use cursors to move to the bottom and go to the
line Audio.
Press ENTER and select the required language.
Press SETUP to leave the menu.
LANGUAGE OF SUB-TITLES
Use cursors to move to the bottom and go to the
line Subtitle Lang.
Press ENTER and select the required language.
It is possible to de-activate the sub-titles by se-
lecting OFF, instead of choosing one of the given
languages.
32