Usb - Sd Card: Remarks And Compatibility - Phonocell VM190 Montageanleitung

USB - SD CARD: remarks and compatibility

ATTENTION:
USB and/or SD-CARD reading-functions get activated ONLY in the presence of a disc inside the
DVD-player.
1 Insert SD/MMC-Card
Insert the SD/MMC-Card with its label showing
upward. The Player will automatically reproduce
the contents of such card, while the display will
indicate READ-CARD.
2 Eject SD/MMC-Card
Press Source-key to leave the READ-CARD-
function. Slightly press onto the SD/MMC-card
to unlock and extract the card.
3 Insert USB
Insert the USB-card into the related slot. The
Player will automatically reproduce the contents
of the USB, while the display will indicate READ-
USB.
4 Eject USB
Press Source-key to leave the READ-USB-func-
tion. Extract the USB-card.
USB/SD/MMC NOTES
The USB function (flash memory type) directly depends on the compatibility between the USB-key and
the DVD-player. Therefore always check for this compatibility.
(1) SD/ MMC card supported (max 2 Gb)
(2) USB flash memory 2in 1 (SD/MMC ) supported
(3) Fat 12/fat 16/fat 32 possible Fat 12/16 (dir: 200; file : 1000) Fat 32 (folders : 200; files : 1000) / Fat
32 (folders: 200; files: 1,000)
(4) File name : 32 digits. ˙Folders: 32 digits; Titles: 32 digits
(5) Tag (id3 tag ver 2.0) title / artist / album: 32 byte supported
(6) Multi card reader NOT supported.
(7) USB 1.1 supported, USB 2.0 supported it can not support USB2.0 speed. It will automatically
read at the same speed as USB1.1
NOTE: whenever the player does not recognise the USB-key introduced, proceed as follows: remove the
USB-key and switch the device OFF and ON again. Then re-introduce the USB-key.
Note: Always check the compatibility between the Player and the USB / SD-CARD, as certain USB or
SD-CARDs may not be recognized or present difficulties for the Player.
If the USB or SD-CARD is not recognized by the Player, proceed as follows:
Take USB/SD-CARD away. Switch Player off and on again. Insert USB/SD-CARD again.
30