Peiying PY-DVR001 Bedienungsanleitung Seite 19

Owner's manual
Note: Protected files cannot be covered by loop recording or
deleted until unlocking them.
G-Sensor
When G-Sensor is on (G in the middle of the top part of the
display), the DVR will protect and lock current video once
G-Sensor has been triggered by instant impacts or shocks from
traffic accident. To set the sensitivity of G-Sensor, press the
menu button while in the recording mode and enter G-Sensor
menu. Available options are Off/ High/ Medium/ Low. Default
setting is [Medium].
Charging
To charge the device use the USB cable to connect it to the
compatible PC USB port or use the car charger to connect the
device to the car charger socket. During charging, the indicator
in the bottom right corner of the display flashes.
EN
Note: The device should be connected to the power supply
during recording (car charger socket).
Reset
If abnormal condition occurs to the device during use, insert
an appropriate object inside the reset socket until the button is
pressed.
19