Assembly; Required Tools; Assembly Preparation - lidl GW 84 B1 Bedienungsanleitung Und Stückliste, Handbuch

GW 84 B1
DANGER! Always place the barbecue on an even, heat-resistant, solid surface and not in
the vicinity of flammable materials, liquids or gases. Ensure a sufficient distance from walls
and other objects and never leave the barbecue unattended when in use and after use for
as long as it is still warm. There is a risk of fire!
DANGER! Only light the barbecue with firelighters that conform to the requirements of
the European EN 1860-3 standard. Never use petrol or methylated spirits. There is
danger of deflagration or uncontrollable heat generation that can lead to serious burn
injuries or fire. There is a risk of injury and fire!
DANGER! Do not use a hairdryer or similar device. There is a risk of flying sparks, and
the barbecue could become damaged.
DANGER! Never use water to extinguish if there is grease on the barbecue. This
can cause an explosive deflagration. Instead, use a fire blanket to suffocate the fire.
DANGER! Only use the barbecue with charcoal. Do not use any other kind of fuel. There
is a risk of fire!
DANGER! When barbecuing, wear protective gloves in accordance with the PPE
Ordinance (Category II regarding thermal risks, DIN-EN 407). Use a suitable instrument
when barbecuing, such as barbecue tongs, to turn the food in order to prevent burns.
There is the risk of burn injuries.
DANGER! Allow the barbecue to cool completely before cleaning. There is the risk of
burn injuries.
WARNING! Keep children and pets away from the barbecue.
WARNING! The barbecue is very hot and must not be moved when in use!
WARNING! When you have finished barbecuing, allow the remaining charcoal to burn
out. Do not extinguish with water.

7. Assembly

7.1. Required tools


Phillips screwdriver

Open-ended spanner: SW 8 mm and two SW 13 mm

7.2. Assembly preparation


Proceed with care when assembling the barbecue.

Plan a sufficient amount of time.

Ensure you have a sufficiently large workspace.

Remove all of the individual components from the packaging and place them somewhere easily
accessible.

Remove all of the assembly materials from the packaging and place them somewhere easily
accessible.

Ensure you have the required tools at hand.
20 - English