Usage Instructions - Klarstein 10023951 Bedienungsanleitung

1. Please read the instructions and all the graphical specifications before using this product.
2. To avoid damaging the product, please insure that the voltage specified on this product is comply
with that in your home before you plug it in.
3. Do not let it work when the user is absent
4. Do not use any other manufacturer's spare parts, or any spare parts not recommended by our
company, otherwise, our company do not provide repairing service.
5. Do not use this product if the power line or plugs or other parts are damaged.
6. Normal operating time: every three minute no stopping operation with three minute stopping.
7. This product is only used in families.
8. The specified voltage for this product is 230V, input power 65W and the frequency 50Hz.
1. Please insure that the drive shaft is installed properly at the bottom of the stirring cup (see Notice Items).
2. The food volume should not exceed the maximum capacity of the stirring cup.
3. The temperature for stirring the food should not exceed 80 centigrade.
4. Do not put your fingers or anything into the stirring cup when it is connecting to the electricity
supply. Only when the electricity supply is cut off, can you deal with the food attached to the wall
of the stirring cup.
5. Do not demolish the stirring cup when it is still at work.
Equipped with safety locks
1. The product is equipped with a safety lock. When the stirring cup is not or inappropriately
installed, the dynamo cannot work.
2. Notice: do not use the stirring cup instead of the switch.
1. Please clean the parts which contact with the food before you use the product for the first time
(see cleaning)
2. Put the food into the stirring cup under the specified capacity.
3. Put the stirring cup on the holder.
4. Please insure that the electricity supply is connected and the stirring cup is installed properly
before you start the product.
5. Press the switch button and start the dynamo.
6. During the stirring process, do not put raw material into the cup; only after the electricity supply
is cut off and the machine stops, can raw material be added into the cup.
1. Please use water to clean the parts which contact with the food after using it. Install the stirring
vessel properly (see usage Instruction), detergent warm water into the stirring cup.
2. Press the switch about 10 seconds for cleaning the stirring cup rapidly.
3. Please cut off the power before cleaning it.
4. Generally, dish-washer cannot be used to clean the product or the spare parts.
5. Soft wet cloth can be used to polish the dynamo, do not immerse dynamo in water. Do not use
abrasive, brusher or alcohol, etc.
6. Demolish the stirring cup and rinse it out with clean warm water.
Notice Items
Stirring Vessel

Usage Instructions

Cleaning
5