Control Panels And Buttons; Button Functions - Klarstein 10033283 Handbuch

CONTROL PANELS AND BUTTONS

Left control panel
Right control panel
ON/OFF • Press the ON/OFF button to turn on the hotplate. A beep
• If you want to switch the hotplate on again, press the ON/
• To switch to standby mode during operation, press the
Note: The hotplate does not have a power switch. The
power supply can only be interrupted by pulling the mains
plug.
TIMER • Use this button to set the cooking time.
LOCK • During operation, press and hold the LOCK button for
• To turn off, press the ON/OFF button or press the LOCK
MENU • Use this button to select the power and temperature level.
UP + DOWN • Use these buttons to set the power, temperature and timer.

Button functions

will sound and the display will show "ON". You can now
make further settings. If no entries are made, a beep
sounds after 1 minute and the hotplate automatically
switches to standby mode.
OFF button. The display shows "ON".
ON/OFF button. A beep sounds, the heating element is
switched off, the display shows "HOT" and the infrared
hob switches to standby mode. (Ventilation will continue
for some time while the hotplate cools down.)
2 seconds to activate the child lock. When the child lock is
on, all buttons other than the LOCK button and the ON/
OFF button are locked.
button for 2 seconds to unlock the child lock.
EN
17