Copyright; Before Start-Up; Proper Mounting Location - LIVARNO LUX LSS 520 A1 Bedienungsanleitung Und Serviceinformationen

LIVARNO LUX LSS 520 A1
DANGER! The housing of the solar LED spotlight (1) and the solar panel (7) must be free of
damage. A damaged housing can result in risk of injury.
DANGER! Do not operate the solar LED spotlight (1) in a potentially explosive atmosphere due
to the presence of combustible gases, vapours or dust, as this would result in risk of explosion.
DANGER! Never look directly into the light beam with the aid of optical instruments, such as a
magnifying lens. There is the risk of injuring your eyes. If you suspect that you may have injured
your eyes, immediately consult a physician.
WARNING! Do not attach any objects to the solar LED spotlight (1) or the
solar panel (7). The housing is not designed to carry any weights. Ignoring this warning may
result in damage to the solar LED spotlight (1) or the solar panel (7).

Copyright

All contents of these operating instructions are subject to copyright law, and are provided to the user
solely as a source of information. Any form of copying or reproduction of data and information is
prohibited without the express written permission of the author. This also concerns commercial use of the
contents and data. The text and illustrations describe the technical status at the time of printing. All
information is subject to change.

Before start-up

Remove the solar LED spotlight (1) and the mounting materials from the packaging.
Check the solar LED spotlight (1) for signs of damage. If the solar LED spotlight (1) is damaged, it must not
be put into operation.
Fully charge the built-in lithium-ion battery before initial start-up. Please make sure that the On/Off switch
(2) is set to 'OFF'.
The duration of the charging process depends on the intensity of the solar radiation. In sunny
weather, charging takes approx. 3 days (given about 4 hours daily and approx. 60,000 lux).

Proper mounting location

Carefully choose the mounting location and thoroughly prepare for assembly.
 Systematically arrange all individual parts, required tools and mounting materials and place them
within easy reach.
 The solar LED spotlight (1) may only be mounted on a sturdy support, such as a masonry wall etc.
 Do not mount the solar LED spotlight (1) above a heat source or within direct proximity of other light
sources. Also account for Figure [D] on the cover page when selecting the mounting location.
 The built-in battery of the solar LED spotlight (1) is exclusively charged via the solar panel (7) part of
the delivery scope. The cable (8) is approx. 3 m long. Therefore, the mounting location of the solar
42 - English