How To Use; Cleaning & Maintenance - Fakir RF-11 TURBO PLUS Benutzeranweisung

How to use

- Plug the appliance to a socket =220-240 V~， 50/60 Hz.
- To start the heater, choose one of the positions I/n/m/m
with the thermostat.
- To stop the heater, put the switch on the position 〇.
- Unplug the product when it's not in use.
Elements I
llfins 1000W
Cleaning & maintenance
• Always disconnect appliance from the main when you clean it.
• In order to avoid any hazard, only clean the appliance with a dry rag lightly humidified
NEVER IMMERSE THE HEATER TO CLEAN IT -To avoid any electrical hazard,
clean your appliance with a soft and clean rag to remove the dust. You can also use
a vacuum cleaner to clean the air openings.
• Clean your appliance regularly.
WARNING!
THE OIL FILLED RADIATOR MUST BE SWITCHED
OFF AND UNPLUGGED FROM THE MAINS POWER
SUPPLY AND ALLOWED TO COOL DOWN BEFORE
ALL CLEANING AND MAINTENANCE TASKS.
Make sure that the plug is taken off from the mains socket Make sure that unit is cooled
down after each use. Wipe the body with a soft, dry cloth. Do not use any abrasive
cleaners. Store the radiator in a dry, cool place.
RF-11 TURBO PLUS
n m
1500W 2500W
19
/ -Set the temperature
m c
2900W 400W
GB