Expolite Tour-Flash Pro Bedienungsanleitung Seite 28

Setting DMX-Address
MENU
PERSON ADDRESS
The DMX start address of the fixture is set in the menu ADDRESS. This is retained even when
changing the personality.
Setting DMX-Personality
MENU
PERSONALITY HSIC
The personality is set in the menu PERSONALITY. There are six different modes which can be
chosen: HSIC (9 channels), SSP (8 channels), TR16 (17 channels), PIXEL.1 (40 channels),
PIXEL.2 (52 channels) and HALOGEN (5 channels).
Edit Static Colours
MENU
PERSON STATIC
Static colours for stand-alone operation are set in STATIC. These are mixed using the DMX value
scale 0-255 for RED, GREEN, BLUE, and WHITE, as well as the STROBE value 0-20Hz.
Activating Auto Programs
MENU
AUTO PROGRAM PERSON
In the menu AUTO PROGRAM the automatic programs stored in the device are activated. The
programs AT01 to AT10 are permanently stored in the device and their run speed can be adjusted.
Automatic programs are transmitted as master to connected slave devices. For master-slave
operation, signals are sent via the DMX line. This may disturb other devices on the same line.
HSIC 001-512
HSIC
SSP
Tr16
PIXEL.1
PIXEL.2
HALOGEN
0 - 255 0 - 255
HSIC RED
GREEN 0 - 255 0 - 255
BLUE 0 - 255
HSIC
HSIC WHITE 0 - 255
HSIC STROBE 0 - 255
P.(0 - 255)
HSIC AUTO.01
o
o
o
AUTO.10 HSIC
E-28