salvus PS300 Bedienungsanleitung Seite 66

4. Dual code (4 eyes principle)
4.1 Programming dual code
Make sure that you programmed a user code (see 2.2) . Make sure that the safe door is open when you
start programming the dual code (ON - master code - ENTER).
.
Step
Press ON
1.
Press Enter
2.
Press 7
3.
Press Enter
4.
Key in the user ID, e.g. 1
5.
Press ENTER
6.
Key in the master code, e.g. 567891
7.
Press Enter
8.
The double code function is now activated.
4.2 Opening with dual code
The lock opens only after entering the master code and the user code which corresponds with the user ID
as programmed in 4.1.
Step
Press ON
1.
Key in the master code, e.g. 567891
2.
Press Enter
3.
The opening window period starts, you hear an audible
4.
signal and the green lamp illuminates every 5 seconds
Key in the user code which corresponds with the user
5.
ID as programmed, e.g. 111111
Press Enter
6.
Open the handle within 5 seconds, the safe is open.
66
Action
Action
Key
ON
Enter
7
Enter
1
Enter
567891
Enter
Key
ON
567891
Enter
111111
Enter
Signal
Signal