Operating Instructions; Overview; Operation - Eufab 21006 Bedienungsanleitung

6. OPERATING INSTRUCTIONS

6.1 OVERVIEW

Figure 1: Overview
1. Motor housing
2. ON/OFF switch
3. Unlocking mechanism for dust container
4. Suction pipe mouth
5. Dust container
6. Connection cable

6.2 OPERATION

Before using the vacuum cleaner, check to make sure that the motor housing (Position 1 in the
Overview) and the housing of the dust container (Position 5 in the Overview) have been connected
correctly. Select the appropriate accessories for your needs, see Figure 2.
Figure 2: Combination options
Unwind the connection cable fully (Position 6 in the Overview) and connect it using the 12 V
vehicle connector to the 12 V on-board socket of your vehicle (for some vehicles, the ignition must be
switched on for the on-board socket to be supplied with power). Position the connection cable in
such a way that it is not stretched, crushed, trapped or passed over sharp edges. Switch the vacuum
7. 12 V vehicle connector
8. Noozle
9. Filter
10. Upholstery brush
11. Extension
Insert the selected combination into the
suction pipe mouth
(Position 4 in the Overview).
9