Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPEAKER RECEIVERS
7. Power LED
TRANSMITTER
1. Insert the antenna tube into the antenna wire.
2. Connect the supplied AC/DC power adaptor to an electrical wall outlet.
3. Plug the AC/DC power adaptor in the DC jack located on the rear of the transmitter.
4. When the AC adaptor is plugged in, the green POWER LED illuminates. If the green POWER LED
does not illuminate, make sure the adaptor is plugged in.
5. The rear of the transmitter has one audio cord that can be connected to audio output jack of TV,
Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD players or to headphone/earphone jack with the
connector provided.
When the transmitter received an audio signal, the blue SIGNAL LED and the green POWER LED will
illuminate together. If the blue SIGNAL LED does not illuminate, ensure the audio source is turned on.
8. Power ON/OFF
9. Volume Up
10. Volume Down
11. Auto Scan
12. Ligth ON/OFF
13. Battery Compartment
INSTALLATION
Werbung
Inhaltsverzeichnis
