Operation - Chal-Tec 10005394 Anschluss- Und Anwendungshinweise

SPEAKER RECEIVERS
1. Insert 6 pieces 'AA' size ALKALINE battery into the battery compartment with correct polarity at
the bottom of the speakers (batteries not included in the package) or connect the 12V power
adaptor to the DC input jack on the bottom of each speaker, then plug it to the wall AC outlet.
2. Press power button
off the speakers by pressing the
1. Turn on the audio source (TV or audio component) to which the transmitter is connected with.
The blue Signal LED on the transmitter will light up.
2. Select the channel (1 or 2) of the transmitter for best performance in your location.
3. Press the button on the speaker to turn on the speaker. Press the auto-scan button
the best tuning reception in the speakers. When
automatically and it stops when a signal is detected.
4. Volume can be adjusted up by pressing
desired listening level.
5. Press the
blue LED lighting.
and turn the speakers ON. The POWER LED will light up in blue. Switch
button on the speaker, and the LED will be off.
lighting button

OPERATION

is pressed, frequency tuning starts
button or down by pressing the button
to turn
to the
ON of OFF
to get
the