Inhaltsverzeichnis
Werbung
If the searched IP address and PC IP address are not in the same network segment, user may
modify IP address, subnet mask, port number and other parameters of IP camera by using Device
Search software.
In the DeviceSearch software, select a device to modify IP address and then input new IP
address, subnet mask, gateway, port number and administrator password(default: admin). Click
【Modify 】 to change IP address of the device, as shown in the following picture：
Note： Default IP of IP camera is "192.168.1.168", username is "admin", password is "admin" , and
media port number is "9988".
11
USER MANUAL
Werbung
Inhaltsverzeichnis
