Device Connection - VC R-Serie Installation Und Betriebsanleitung

Device Connection

There are two types of connection：
1. Connect the device with PC
Connect IP camera with PC by network cable. The supply hub of IP camera is connected with
DC 12V power supply. Set the IP of PC and that of IP camera in the same network segment. If the
network is normal, wait for 1 minute after power on and IP camera will establish communictaion
with PC.
2. Connect the device with router or switchboard.
It the most commonly used way to connect IP camera to the Internet. Connect IP camera and PC to
Lan Port on the router or switchboard and set the gateway of IP camera as that of the router.
7
USER MANUAL