Usb Device Connection - AIPTEK ProjectorPad P70 Bedienungsanleitung

Quick Start Guide
end of the supplied power adapter to power jack (15) and the other
end to a power outlet to start charging. Exchange the plug (EU, US,
AUS) of the power adapter that accommodates the type of power
outlet in your country if it is different.
Turn On/Off the device
Press the power button (2) for 3 seconds to power on the device.
After booting the lock screen will appear. Unlock the device by
sliding your finger to the outer ring. Press power button (2) for
max 1 second to turn the device to standby mode or press the
power button (2) for 2 seconds and the screen will display the
power selection menu. Choose "Power off" to fully shut down the
device.
Turn On the projector
When the device is powered on, press
the Projector On/off switch (6) to turn
on projector. Push the button again to
deactivate the tablet display and just use
the projection. A third press will turn off
the projector and return to tablet
screen.
Adjusting the Projector Focus
Adjust the focus by moving the focus wheel (14) upward or
downward to get a sharp and clear picture.

USB Device Connection

The tablet can access and project the
content from OTG USB device such
as USB dongles or external hard disks.
Connect one end of the USB adaptor
to the micro-USB port (17) of the unit
and the other end to USB device as
shown.
2